Duras inflatable boats
are available in 3 convenient sizes. The DX104 model
is 10 ft 4 in long, the DX96 is 9 ft 6 in long, and
the DX86 measures 8 ft 6 in long.
All
models are equipped with three separate
air chambers for added protection and have heat
welded seams. Standard equipment includes two oars,
aluminum seat, pressure gauge, patch kit, valve replacement tool,
and a heavy duty foot air pump. All include our five
year limited warranty.
The 1000 Denier Hull Material: The 1000 denier hull material is a rugged, solid material that operates with a 3.6 PSI working pressure.
The Air Compartments: All Duras Inflatable Boats have three air chambers in the tube and an inflatable keel. The air chambers are completely separate and ensure buoyancy in the event of a single chamber failure.
The One-Way Valve: Your Duras Inflatable Boat utilizes a one-way valve, a proven design that has been used for 20 years. This simple, rugged, one-way valve makes inflation easy. The inner valve design allows air to flow into the hull but not out and the outer valve cap makes the seal permanent. The plastic stem on the inner valve allows the boat to be deflated. Push in the inner valve and turn it to release air. Make sure the plastic stem is in the out position for inflation.
Rear Drain Valve: All Duras Inflatable Boats have a rear drain valve to drain water from the inside of the hull.
Foot Pump: All Duras Inflatable Boats come with a deluxe high pressure foot pump to ensure the boat is inflated to the recommended air pressure.
Pressure Gauge: All Duras Inflatable Boats come with a pressure gauge to ensure the boat is inflated to the recommended air pressure.
Repair Kit: All Duras Inflatable Boats come with a repair kit which includes glue, patch material and a valve removal tool.
|