| Model No. |
Manufacturer No. |
Product Image |
Product Name |
Price |
| 23-1364A3 | 1364A3 |  | Cowl Ventilator
Can be used with any standard 3" ventilation hose. Features flexible hose flange that is screwed onto hose, then snaps onto the flange. The neck extends 1" below deck. Die cast Zamak with perma-plate chrome finish. Flange is non corrosive plastic. Installs with #8 fasteners. | $24.79
|
| 23-14053 | 14053 |  | Twist-On Hose Flange
For 3" hose. Resistant to gasoline, moisture and any form of marine rot. Installation hole diameter is 3-1/2". Predrilled with three mounting holes to accommodate #10 screws. Black polyethylene. Permits installing hose from topside. No hose clamp needed. | $5.95
|
| 35-C7 | C7 |  | Cowl Vent W/Hose Adapter F/3
White ABS vent cap with vent hose adapter that mounts to deck. Vents snaps into place on adapter. | $48.13
|
| 35-C8 | C8 |  | Cowl Vent W/Hose Adapter F/4
White ABS vent cap with vent hose adapter that mounts to deck. Vents snaps into place on adapter. | $40.05
|
| 35-SA4 | SA4 |  | Vent Hose Adapter
Designed for attaching ventilation hose to deck for use with Beckson "C" series vents. | $10.36
... more info
|
| 35-SC7 | SC7 |  | Soft Cowl Vent
PVC. Ideal for areas where vent will be under foot or foul lines. | $20.34
... more info
|
| 760-H5041B | H5041B |  | Euro Vent Black
| $24.13
... more info
|
| 9-0870DP0CHR | 0870DP0CHR |  | Cowl Ventilator
Chrome plated. 3" duct threads into neck. Hose clamps not required. Mouth opening is 7 square inches. Screw size is #10. | $34.01
|
| 9-1312DP0CHR | 1312DP0CHR |  | Chromalex Cowl Ventilator
Chrome plated zinc cowl with black plastic base. 3" duck threads into neck. Hose clamps not required. Mouth opening is 7 square inches. Screw size is #8. | $26.48
|
| 354-3313201 | 3313201 |  | Cowl Vent w/Base
Stainless with a plastic base. Use with 3" hose and #8 flat head fastener. | $34.66
|
| 354-3373161 | 3373161 |  | Flush Hose Vent
Injection molded ABS. Overall face dimension is 3-5/8" x 3-5/8". Hose/hole size 3". Carded. | $2.96
|
| 354-337350 | 337350 |  | Hose Vent Elbow, 3"
Injection molded ABS. Works in conjunction with Flush Thru-Vent part numbers, 337326, 337316 and 337376. | $6.22
|
| 354-337375 | 337375 |  | Hose Thru Vent, 3"
Injection molded ABS. #8 FH fastener. | $5.76
... more info
|
| 354-337470 | 337470 |  | Hose Vent
Injection Molded Chrome ABS
Fasteners: #10 FH. Chrome picture shown. | $2.99
... more info
|
| 354-337490 | 337490 |  | Hose Thru Vent, 4"
Injection molded ABS. #8 FH fastener. | $7.86
... more info
|
| 354-7271303 | 7271303 |  | | $23.53
|
| 354-7271323 | 7271323 |  | 3 Pvc Lowprofile Cowlvent Wht
Dip molded PVC.
Includes snap-on deck plate. | $22.88
|
| 354-7271353 | 7271353 |  | | $28.77
|
| 354-7271373 | 7271373 |  | 3 Pvc Stdprofile Cowlvent Wht
Dip molded PVC.
Includes snap-on deck plate. | $28.12
|
| 354-7271403 | 7271403 |  | | $30.09
|
| 354-7271423 | 7271423 |  | 4 Pvc Lowprofile Cowlvent Wht
Dip molded PVC.
Includes snap-on deck plate. | $29.43
|
| 354-7271453 | 7271453 |  | | $39.25
|
| 354-7271473 | 7271473 |  | 4 Pvc Stdprofile Cowlvent Wht
Dip molded PVC.
Includes snap-on deck plate. | $38.59
|
| 50-16031 | 16031 |  | Cowl Ventilator
Die cast zamak with chrome finish. Black polypropylene flange. Pre-drilled for three screws. | $21.55
|
