Model No. |
Manufacturer No. |
Product Image |
Product Name |
Price |
23-17314 | 17314 | | Turbo 3000-3" Blower Wht 12V Patented in-line-design - provides ventilation for engine compartments, galleys, bilges and heads. Mounting feet allow horizontal or vertical installation in confined spaces | $26.83
|
23-17334 | 17334 | | Turbo 3000-3 Blower White Patented in-line-design - provides ventilation for engine compartments, galleys, bilges and heads. Mounting feet allow horizontal or vertical installation in confined spaces | $28.21
|
23-17474 | 17474 | | Blower-Turbo 4000 4" White The new and improved Turbo 4000 Series II is quieter and has a re-engineered housing that resists deformation during installation and prevents blade to housing interference. Utilizing advanced blade design techniques has allowed these new blowers to match the air flow of existing in-line blowers at significantly reduced noise levels. Low current draw at 2.5 amps. Individually boxed. | $29.95
|
23-17494 | 17494 | | Water Resistant Quiet Blower The new and improved Turbo 4000 Series II is quieter and has a re-engineered housing that resists deformation during installation and prevents blade to housing interference. Utilizing advanced blade design techniques has allowed these new blowers to match the air flow of existing in-line blowers at significantly reduced noise levels. Low current draw at 2.5 amps. Individually boxed. | $32.48
|
6-347390010 | 347390010 | | Par 12V Blower Flangemount Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, subpart K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flangemount blowers are generally mounted with discharge port fastened directly to flat external surface minimizing required ducting. Inlet port can be connected with duct hose to area requiring ventilation. | $153.18
|
6-347440000 | 347440000 | | Par 115V Blower Flangemount Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, subpart K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flangemount blowers are generally mounted with discharge port fastened directly to flat external surface minimizing required ducting. Inlet port can be connected with duct hose to area requiring ventilation. Note: Model 347440000 is not ignition protected and is not intended for bilge ventilation on vessels with gasoline engines. | $195.20
|
6-351150020 | 351150020 | | 12 Volt Blower Flangemount Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, subpart K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flangemount blowers are generally mounted with discharge port fastened directly to flat external surface minimizing required ducting. Inlet port can be connected with duct hose to area requiring ventilation. | $91.18
|
6-354000000 | 354000000 | | Par 12V Blower Flangemount 4 Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, subpart K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flangemount blowers are generally mounted with discharge port fastened directly to flat external surface minimizing required ducting. Inlet port can be connected with duct hose to area requiring ventilation. | $170.25
|
6-354000010 | 354000010 | | Par 24V Blower Flangemount 4 Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, subpart K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flangemount blowers are generally mounted with discharge port fastened directly to flat external surface minimizing required ducting. Inlet port can be connected with duct hose to area requiring ventilation. | $200.14
|
6-354400000 | 354400000 | | Par 12V Blower Flex-Mount 4 Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, subpart K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flexmount blowers have both inlet and outlet ports designed for slip-on flexible duct connections and are ideal when an in-line installation of blower is preferred. May be rotated in bracket to permit installation with discharge port in any direction. | $174.75
|
6-355150010 | 355150010 | | Par 12V Blower Flexmount 3 Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, subpart K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flexmount blowers have both inlet and outlet ports designed for slip-on flexible duct connections and are ideal when an in-line installation of blower is preferred. May be rotated in bracket to permit installation with discharge port in any direction. | $109.56
|
6-357600092 | 357600092 | | 4" Continuous Heavy Duty Blower w/Flangemount, 12V Continuous heavy duty blowers have a minimum life of 10,000 hours, making them ideal for general engine room or genset enclosure ventilation. They are also well suited for general ventilation of head or galley areas and any application that requires regular extended operation. Rated at 250 CFM . | $281.93
|
6-357700092 | 357700092 | | 4" Continuous Heavy Duty Blower w/Flexmount, 12V Continuous heavy duty blowers have a minimum life of 10,000 hours, making them ideal for general engine room or genset enclosure ventilation. They are also well suited for general ventilation of head or galley areas and any application that requires regular extended operation. Rated at 250 CFM . | $249.57
... more info
|
6-367400000 | 367400000 | | Par 12V 3 Blower Flexmount Offers safe, efficient and have high volume evacuation of hazardous vapors on vessels equipped with gasoline powered engines. Satisfy requirements of USCG regulation Title 46, Chapter I, part 183, subpart K for marine ventilation when properly installed and used. BIA type accepted. Also exhausts warm air from galleys and engine rooms, ventilating steam or odors from heads and general marine air circulation. Constructed of tough reinforced plastic housing and one-piece balanced rotor for maximum corrosion resistance. Flexmount blowers have both inlet and outlet ports designed for slip-on flexible duct connections and are ideal when an in-line installation of blower is preferred. May be rotated in bracket to permit installation with discharge port in any direction. | $165.43
|
189-54124 | 54124 | | Blower-Flange Mount F/3 Hose Radial flow design. Produces a substantial output at relatively low RPM's. Low noise level make excellent for use in heads & galleys. Massive 3" diameter motor idles at 3100 RPM's assuring long life. Housings are molded of tough glass filled composite resin. Flange Mount # 54124 - Conventional design outlet flange to mount directly to the exhaust opening in the hull. Molded mounting brackets simplify installations. Remote Mount # 54154 - 3" ducts attach to both the inlet and the outlet and readily adapt to new or existing vents and collector boxes. Brackets are molded in. | $71.71
|
189-54154 | 54154 | | Blower-Remote Mount F/3 Hose Radial flow design. Produces a substantial output at relatively low RPM's. Low noise level make excellent for use in heads & galleys. Massive 3" diameter motor idles at 3100 RPM's assuring long life. Housings are molded of tough glass filled composite resin. Flange Mount # 54124 - Conventional design outlet flange to mount directly to the exhaust opening in the hull. Molded mounting brackets simplify installations. Remote Mount # 54154 - 3" ducts attach to both the inlet and the outlet and readily adapt to new or existing vents and collector boxes. Brackets are molded in. | $71.71
|
189-66302 | 66302 | | In-Line Blower, 3" High efficiency blower High capacity at low amp draw Constructed of ABS plastic Meets & exceeds: ABYC H-2 NMMA Type Accepted, U.S.C.G. 33 CFR sections 183.410, 183.425 & 183.610 1 Year Warranty | $35.83
|
189-66402 | 66402 | | In-Line Blower, 4" High efficiency blower High capacity at low amp draw Constructed of ABS plastic Meets & exceeds: ABYC H-2 NMMA Type Accepted, U.S.C.G. 33 CFR sections 183.410, 183.425 & 183.610 1 Year Warranty | $35.83
|
189-804741701 | 804741701 | | AirV Radial Blower, 4" Extra heavy duty marine radial blower is designed for engine compartment ventilation prior to startup. Made for continuous duty and is therefore suitable for air intake or extraction in bilges, galleys, accommodation and other compartments. Flange Mount design with double ball bearing motor, high-impact anti-shock ABS body with stainless steel shaft and screws. | $146.73
|
29-140 | 140 | | Bilge Blower-3 "L"e Provides ventilation for bilges, engine compartments, galleys and heads. Designed for efficient, high output operation. Easily installed on any flat surfaces. Sealed motor shaft for moisture protection. 13.6 Volts. | $33.68
|
29-240 | 240 | | Bilge Blower-4 "L"e Provides ventilation for bilges, engine compartments, galleys and heads. Designed for efficient, high output operation. Easily installed on any flat surfaces. Sealed motor shaft for moisture protection. 13.6 Volts. | $37.43
|
50-41841 | 41841 | | 4" In-Line Exhaust Blower Housing is molded of tough, corrosion-proof ABS plastic. Rugged built-in mounting brackets for easy installation. Molded tabs on all hose flanges provide positive hose connections. Blower meets or exceeds the following standards: ABYCH H-2, NMMA Certified, USCG 33 CFR Sections 183.410 and 183.425, ISO 9097, UL Listed, UL 1128 Standard Marine blowers. 4" Intake. 4" exhaust with remote bracket. 5-3/4" length. 4-3/4" mounted height. CFM 240 air movement. Ignition protected & spark proof. 12V DC, 4.5A. Use 5A fuse. | $22.66
... more info
|
50-41851 | 41851 | | 3" In-Line Exhaust Blower Housing is molded of tough, corrosion-proof ABS plastic. Rugged built-in mounting brackets for easy installation. Molded tabs on all hose flanges provide positive hose connections. Blower meets or exceeds the following standards: ABYCH H-2, NMMA Certified, USCG 33 CFR Sections 183.410 and 183.425, ISO 9097, UL Listed, UL 1128 Standard Marine blowers. 3" Intake. 3" exhaust with remote bracket. 8" length. 4-3/4" mounted height. CFM 170 air movement. Ignition protected & spark proof. 12V DC, 4.0A. Use 6A fuse. | $21.05
... more info
|