Wax 'N' Grease Killer Gl Every new fiberglass hull produced is released from the mold by a mold release wax. In order to obtain proper adhesion of paint this wax must be removed. The suggested method of use is to apply S-80 Wax "N" Grease Killer. Using two clean new cloths, wet one cloth with S-80. Wipe S-80 on with one hand in areas to be painted and follow immediately with dry cloth. Do this to the entire hull 2 times. All waxes will then be eliminated.
Wax 'N' Grease Killer Qt Every new fiberglass hull produced is released from the mold by a mold release wax. In order to obtain proper adhesion of paint this wax must be removed. The suggested method of use is to apply S-80 Wax "N" Grease Killer. Using two clean new cloths, wet one cloth with S-80. Wipe S-80 on with one hand in areas to be painted and follow immediately with dry cloth. Do this to the entire hull 2 times. All waxes will then be eliminated.
S-90 De-Waxing Etch And Cleaner This water-based low VOC wax etch and cleaner is a concentrated formula which provides deep penetrating and lifting action for removal of tough surface contaminants. Penetrating action is effective on wax, oil residues, surface soiling contaminants, and mold spores. Eliminates the need for sanding.
