|
|
Polk Stereo Equipment
Polk Stereo Equipment
Displaying 1 to 6 (of 6 products)
| Model No. |
Manufacturer No. |
Product Image |
Product Name |
Price |
| 450-MM1040UM | MM1040UM |  | 10" Ultra Marine Subwoofer
Designed specifically for use in the marine environment. New polymer woofer cones and butyl rubber surrounds will not break down over time. High temperature 2" copper voice coil withstands rigorous use while maintaining extremely low distortion for bass punch and output. Stainless steel heavy duty input terminals will not corrode or tarnish. Will accommodate speaker wire up to 8 AWG or twisted pairs of 12 AWG.
Power Handling: 700WPeak, 350W RMS
Frequency Response: 24Hz - 200Hz
Sensitivity: 91dB
Impedance: 4 Ohms
Resonant Frequency 35 Hz
Cutout Diameter: 9-1/8"
Mounting Depth (top): 4-5/8" (bottom): 5-3/16" | $162.73
... more info
|
| 450-MM10GUMSB | MM10GUMSB |  | 10" Subwoofer Matching Protective Grill
Protective grill for MM1040UM subwoofer | $14.47
... more info
|
| 450-MM6501UM | MM6501UM |  | 6.5" Coaxial Ultra Marine Component Speaker System
Designed and styled specifically for use in the marine environment with a completely sealed front design that prevents water intrusion. Sealed crossover assembly built into back of magnet means there's no need to find room to hide an extra box. Stainless steel heavy duty input terminals and mounting hardware will not corrode or tarnish.
Two 1" soft dome tweeters
Power Handling: 200W Peak, 100W RMS
Frequency Response: 40Hz - 25kHz
Sensitivity: 92dB
Impedance: 4 Ohms
Cutout Dimensions: 5-1/16"
Mounting Depth (top): 2-5/8" (bottom): 2-7/8" | $263.77
... more info
|
| 450-MM651UM | MM651UM |  | 6.5" Coaxial Ultra Marine Speakers
Designed and styled specifically for use in the marine environment with a completely sealed front design prevents water intrusion. Built-on grille includes tweeter mount which eliminates the traditional tweeter "stalk". Sealed crossover assembly built into back of magnet means there's no need to find room to hide an extra box. Stainless steel heavy duty input terminals and mounting hardware will not corrode or tarnish.
1" (25mm) soft dome tweeter
Power Handling: 200W Peak, 100W RMS
Frequency Response: 40Hz - 25kHz
Sensitivity: 92dB
Impedance: 4 Ohms
Cutout Dimensions: 5-1/16"
Mounting Depth (top): 2-5/8" (bottom): 2-7/8" | $233.42
... more info
|
| 450-PAD20002 | PAD20002 |  | 2 Channel Amplifier
Anodized, extruded aluminum covers and rugged end caps and stainless steel hardware won't corrode in humid environments. Uses a Class D bridgeable, high-speed MOSFET switching power supply for fast response and high efficiency. Runs cooler than conventional amps. Toroidal transformers help keep the amplifier's sleek aluminum extruded design under 2" tall while ensuring plenty of clean, efficient power. Low THD's, high signal-to-noise ratios rated at full power, plus wide bandwidths for clean, distortion-free sound. Thermal, DC offset, reverse DC voltage and short circuit protection.
Watts per channel: Not bridged: 250 watts at 2 ohms, 125 watts at 4 ohms
Watts per channel bridged: 500 watts at 4 ohms | $249.99
... more info
|
| 450-PAD40004 | PAD40004 |  | 4 Channel Amplifier
Anodized, extruded aluminum covers and rugged end caps and stainless steel hardware won't corrode in humid environments. Uses a Class D bridgeable, high-speed MOSFET switching power supply for fast response and high efficiency. Runs cooler than conventional amps. Toroidal transformers help keep the amplifier's sleek aluminum extruded design under 2" tall while ensuring plenty of clean, efficient power. Low THD's, high signal-to-noise ratios rated at full power, plus wide bandwidths for clean, distortion-free sound. Thermal, DC offset, reverse DC voltage and short circuit protection.
Channel mode switch (ST/4Ch)-In the stereo position, the amplifier will send the same signal to front and rear channels.
Watts per channel Not bridged: 200 watts at 2 ohms, 125 watts at 4 ohms
Watts per channel bridged: 400 watts at 4 ohms | $381.26
... more info
|
|
